Installation & Assembly

13FR-W1910-52/62L
9. Making the Electrical Connections
Mounting Bracket
Receiver
Remember to disconnect the power at the circuit breaker.
CAUTION: If you feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed electrician.
NOTE: Installation of this fan requires that a three-conductor cable
(including ground wire) be run between ceiling and wall outlet boxes.
1. Insert the receiver into the mounting bracket with the at
side of the receiver facing the ceiling (FIG.11).
Follow the steps on the next page to connect the fan to your
household wiring. Use the included plastic wire nuts with your
fan. Secure the plastic wire nuts with electrical tape. Make sure
there are no loose strands or connections.
FIG.12
FIG.6
FIG. 11