Installation & Assembly

2
modernforms.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Modern Forms retains the right to modify the design of our products at any time as part of the company’s continuous improvement program.
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
MOUNTING THE FIXTURE (Fig. 1)
3. Remove the mounting screw (C) from the mounting back plate.
4. Secure the mounting back plate to the junction box using junction box screws (B). The side of the mounting back plate marked “GND” must
face out.
5. Insert the glass into the lamp body vertically and carefully, and secure them with screws (D)and washer (E).
CONNECTING THE WIRES (Fig. 2)
6. Connect the xture’s wires to junction box wires as shown in Fig. 2, making sure that all wire connectors (A) are secured. If your outlet box
has a green or bare copper ground wire, connect the xture’s ground wire to it. Otherwise, connect the xture’s ground wire directly to the
back plate using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
COMPLETING THE INSTALLATION (Fig. 3)
7. Secure the xture to the mounting back plate using the mounting screw (C).
INSTALLATION INSTRUCTION
808 – LED Wall Sconce
WS-80827/ WS-80838/WS-80827F/ WS-80838F
G0
Fig.1 Mount on Switch Box
Mounting Backplate
#7MBC501003
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig. 2 Wiring
Lamp Body
Mounting Screw
Wood
Screw
Mounting
Backplate
Plastic
Anchor
Wire Connector
Junction Box
Ground Wire
Junction
Box Screw
Screw
Washer
Mitered Glass
(WS-80827:RPL-GLA-80827)
(WS-80838:RPL-GLA-80838)
C
F
G
A
B
D
E
4
1 4
″
1
3
8
″
1
3
4
″
23
5
8
″
31
1
2
″
WS-80827:19
5
8
″
WS-80838:
WS80827:15
3
4
″
WS80838:
WS-80827
WS-80827
WS-80838
WS-80838
19 5/8”
4 1/4”
15 3/4”
1 3/4”
1 3/8”
31 1/2”
23 5/8”