Installation & Assembly

2Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
modernforms.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the mounting hardware.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
CONNECTING THE WIRES (Fig. 2)
3. Remove the mounting screw (A1) from the mounting back plate.
4. Secure the top and bottom sheet glass to the xture with knurling screw (D1) and plastic gasket (E1).
5. Connect the driver input wires to junction box wires as shown in Fig. 2, making sure that all wire connectors (B1) are secured. If your outlet
box has a green or bare copper ground wire, connect the xture’s ground wire to it. Otherwise, connect the xtures ground wire directly to
the back plate using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
*Require Driver to be recessed within the junction box.
MOUNTING THE FIXTURE (Fig. 1)
6. Secure the mounting plate to the junction box using junction box screws (C1).
The side of the mounting back plate marked “GND” must face out.
7. Place the xture on the mounting plate, and secure it with mounting screw (A1).
Fig.1
Wire Connector
Mounting Screw
Knurling Screw
Plastic Gasket
Sheet Glass
Junction Box Screw
Mounting Plate
Ground Wire Screw
Ground Wire
Junction Box
Driver
B1
A1
D1
E1
C1
Back Plate Dimensions
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig.2 Wiring
INSTALLATION INSTRUCTION
976 - LED Wall Sconce
WS-97614
5 7/8”
4 1/4”
1 3/4”
1 3/8”