Installation & Assembly

2Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
modernforms.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
FIG.1
Back Plate Dimensions
A1
F1
G1
E1
D1
C1
B1
Wire Connector
Allen Screw
Allen Wrench
Mounting Plate
Ground Screw
Glass
1 3/8”
1 3/4”
4 1/2”
5 3/4”
Junction Box
Wood Screw
Plastic Anchor
Junction Box Screw
Mounting Screw
Glass Box
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the mounting hardware.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
MOUNTING THE FIXTURE (Fig. 1)
3. Remove the mounting screw (B1) from the xture.
4. Drill a hole in the wall aligned with the key holes located in the glass box, insert the plastic anchor (D1) to the wall.
5. Secure the mounting plate to the junction box using junction box screw (C1). The side of the mounting back plate marked
“GND” must face out.
CONNECTING THE WIRES (Fig. 2)
6. Connect the xture wires to junction box wires as shown in Fig. 2, making sure that all wire connectors (A1) are secured. If your outlet box
has a green or bare copper ground wire, connect the xture’s ground wire to it. Otherwise, connect the xture’s ground wire directly to the
back plate using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
MOUNTING THE FIXTURE (Fig. 1)
7. Place the xture on the mounting plate, and secure it with
mounting screw (B1). Fasten the xture to the wall using the
wood screw (E1).
8. Insert the glass to the glass box, and secure it with Allen screw (F1)
using Allen wrench (G1) provided.
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig.2 Wiring
INSTALLATION INSTRUCTION
136 - Vanities & Sconces
WS-13619/WS-13630/WS-13641