Installation & Assembly

Modern Forms
www.modernforms.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program. AUGUST, 2015 2
Fig. 1
INSTALLATION INSTRUCTION
Aegean - Wall Sconce
WS-45531
Wire Connector
Mounting Plate
Wood Screw
Junction Box
Junction Box Screw
Anchor
Fixture Screw
Set Screw
Glass holder
Glass
C1
A1
D1
P1
J1
O1
B1
H1
Technology Upgraded
No Driver Required
Driver
(Please direct wire with 120V AC)
PREPARATION
- Shut o the power at the circuit breaker and remove existing xture, including the mounting hardware.
- Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
MOUNTING THE FIXTURE (FIG. 1)
1. Secure the mounting plate (D1) to the junction box using the junction box screws (J1). The side of the mounting plate marked “GND” must
face out.
CONNECTING THE WIRES (FIG. 2)
2. Connect the xture wires to supply wires as shown in Fig.2, making sure that all wire connectors (B1) are secured. If your outlet box has
a green or bare copper ground wire, connect the xture’s ground wire to it. Otherwise, connect the xture’s ground wire directly to the
mounting plate (D1) using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
MOUNTING THE FIXTURE (FIG. 1)
3. Slide the glass onto the xture.
4. Secure the glass holder (H1) onto xture using the screws (C1) from the back. Note: If the slanted glass diuser is not level,
adjust by unscrewing the screws on glass diusers.
5. Place the xture onto the mounting plate (D1). Secure using the xture screws (A1)
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig. 2
Back Plate Dimensions
11 3/4”
4 3/4”
1 1/2”
4 1/4”
1 3/4”