Installation & Assembly
Modern Forms
www.modernforms.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEPTEMBER, 2014
INSTALLATION INSTRUCTION
Bahn
WS-6826, WS-6838
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the mounting hardware.
2. Carefully unpack your new xture and lay out the parts on a clear area. Be careful not to lose any small parts necessary
for installation.
3. Remove mounting screws (C1) and knurling nuts (L1) and xture from mounting plate (D1)
4. Drill the holes in the wall aligned with the key-hole location in the mounting plate (D1). Insert the mounting anchors (K1).
5. Connect the xture wires to junction box wires as shown in Fig. 2, making sure that all wire connectors (A1) secured.
Fixture and junction box ground wires should be connected to mounting plate using green screw provided.
After wires are connected, tuck them carefully inside the junction box.
6. Secure the mounting plate (D1) to the junction box (F1) using the junction box screws (B1). The side of the mounting plate
marked “GND” must face out.
7. Fasten the mounting screws (J1) into the mounting anchors (K1). Tighten the mounting plate (D1) onto the wall.
8. Fasten the xture (G1) onto the mounting plate (D1) using knurling nuts (L1).
9. Place the glass (H1) into the xture frame (E1). Secure onto the xture (G1) using the mounting screws (C1).
100%-10% DIMMING
COMPATIBLE WITH THE FOLLOWING ELECTRONIC
LOW VOLTAGE (ELV) DIMMERS
Brand Model
LUTRON SELV-300P
LUTRON DVELV-300P
LEVITON MLE03-1
A1
F1
B1
K1
D1
J1
G1
L1
H1
E1
C1
FIG.1
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig.2 Wiring
Fixture Screw
Fixture Screw
Glass
Knurling nuts
Fixture
Mounting
Screw
Mounting
plate
Anchor
Junction Box Screw
Wire Connector
Junction Box