Installation & Assembly

Modern Forms
www.modernforms.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
Modernforms retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014
INSTALLATION INSTRUCTION
GLACIER
WS-6519, 6528, 6537
PREPARATION
1. Shut o the power at the circuit breaker
and remove existing xture, including
the mounting hardware.
2. Carefully unpack your new xture
and lay out all the parts on a clear area.
Be careful not to lose any small parts
necessary for installation.
MOUNTING THE FIXTURE (Fig. 1)
3. Drill holes in the wall aligned with the
key-hole location in the mounting plate (D1).
Insert the mounting anchors (K1).
4. Secure the mounting plate (D1) to
the junction box (F1) using the junction box
screws (B1). The side of the mounting plate
marked “GND” (D1) must face out.
5. Fasten the wood screws (J1) into the mounting
anchors (K1). Tighten the mounting plate (D1)
onto the wall.
CONNECTING THE WIRES (Fig. 2)
6. Connect the xture wires to supply wires as shown
in Fig. 2, making sure that all wire connectors (A1) secured.
If your outlet box has a green or bare copper ground wire,
connect the xture’s ground wire to it. Otherwise, connect
the xture’s ground wire directly to the mounting plate (D1)
using the green screw provided. After wires are connected,
tuck them carefully inside the junction box.
7. Place the xture back plate (G1) over the mounting
plate (D1) and secure with mounting screws (C1).
8. Iinsert the glass (E1) into the holder. Secure with Allen
screws (I1) and Allen wrench (H1) provided.
FIG.2
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare Copper
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
100%-10% DIMMING
COMPATIBLE WITH THE FOLLOWING ELECTRONIC
LOW VOLTAGE (ELV) DIMMERS
Brand Model
LUTRON SELV-300P
LUTRON DVELV-300P
LEVITON MLE03-1
J1
C1
G1
I1
H1
E1
K1
D1
B1
A1
F1
FIG.1