Installation Sheet

FR-W2201-65L
Wyndmill Instructions20
7. Finishing the Installation
8. Installing Adapter Plate
1. Secure wire connectors with supplied wire ties.
2. Install canopy to mounting bracket with the screw removed in
section 4 (Fig. 8).
3. Install canopy screw ring as shown (Fig. 8).
1. Remove 1 of 3 screws and loosen the others from the mounting
ring (do not remove).
2. Twist lock adapter plate into place (Fig. 8).
3. Using the screw from the previous step, install the
adapter plate (Fig. 8).
9. Installing the Luminaire Module/Glass Shade
1. Remove the 3 screws from the outer perimeter of the adapter
plate.
2. Attach LED wires from motor assembly to luminaire module
(Fig. 8A).
3. Secure the luminaire module with the 3 screws to the
adapter plate (Fig. 8A).
4. Install the shade by twisting it into place.
Make sure it is on tight. (Fig. 8B).