Installation Guide

FR-W1910
Roboto Instructions8
Package Contents
4. Coupling Cover
RPL-COU-CVR-**
5. Motor Assembly
6. Control Receiver
w/Hardware (***)
F-R3-1910-**
7. Wall Control w/ Hardware
F-WCBT-WT
• Wood screws (2), screws (2)
• 5/32” lock washers (2),
at washers (2)
• 5.4mm lock washers (2),
wire nuts (3) w/ Blade
Attachment Hardware
Hardware Bag
RPL-ROBOTO-PARTS
1. Blade Set of 3 (52”/62”)
RPL-F1910-**-BD-**
2. Hanger Assembly -
Mounting Bracket
Downrod Assembly
RPL-HGR-ASM-**
3. Canopy & Canopy
Screw Ring
RPL-CAN-RND-**
** denotes nish code of fan *** denotes blade sweep of fan
Before discarding packaging materials be certain all parts have been removed.
Place the parts from the hardware bag into a small container to keep them from being lost.
• Screws with rubber washers (7)
• Decorative plug