Installation Sheet

11FR-W1817
FIGURE 12
Receiver
Mounting
Bracket
7. MAKING THE ELECTRICAL CONNECTIONS
WARNING: To avoid possible electrical shock, be sure electricity is turned
o at the main fuse box before wiring.
WARNING: Installation of this fan requires that a
three-conductor cable (including ground wire) which should run between
ceiling and wall outlet box.
WARNING: Check to see that all connections are tight, including ground,
and that no bare wire is visible at the wire nuts, except for the ground
wire.
Insert the receiver into the mounting bracket with the at side of the
receiver facing the ceiling. (Fig 12)
Follow the steps below to connect the fan to your household wiring.
Use the included plastic wire nuts with your fan. Secure the plastic wire
nuts with electrical tape. Make sure there are no loose strands or
connections.