Installation Guide

14FR-W1812; FR-W1813
10. MAKING THE ELECTRICAL CONNECTIONS
Mounting
bracket
Receiver
REMEMBER to disconnect the power by removing fuses or turning o circuit breaker.
WARNING: To avoid possible electrical shock, be sure electricity is turned o
at the main fuse box before wiring.
WARNING: Installation of this fan requires that a two-conductor cable with
ground wire be run between ceiling and wall outlet box.
WARNING: Check to see that all connections are tight, including ground, and
that no bare wire is visible at the wire nuts, except for the ground wire.
If you feel you do not have enough electrical wiring knowledge or experi-
ence, have your fan installed by a licensed electrician.
Insert the receiver into the mounting bracket with the at side of the receiv-
er facing the ceiling (Fig. 16).
Follow the steps on the next page to connect the fan to your household
wiring. Use the plastic wire nuts with your fan. Secure the plastic wire nuts
with electrical tape. Make sure there are no loose strands or connections.
FIGURE 16