Installation Guide

16FR-W1806
10. ATTACHING THE FAN BLADES
1. Attach the blade to the blade arm using the screws with rubber washers
as shown in Figure 17.
2. Fasten blade assembly to motor using the screws supplied (Fig. 17).
11. INSTALLING THE ADAPTER PLATE
FIGURE 17
FIGURE 18
Screws with
Rubber Washers
Blade
Blade Arm
Screws
Mounting Ring
Adapter Plate
Screws
1. Remove one of the three mounting plate screws from the
mounting ring and loosen the other two screws (do not remove).
2. Place the key holes in the mounting plate over the two screws previously
loosened from the mounting ring. Turn the mounting plate until the adapt-
er plate locks in place at the narrow section of the key holes (Fig. 18).
3. Tighten the two mounting ring screws previously loosened and
the one previously removed to secure adapter plate.