Installation Guide

11FR-W1804
FIGURE 12
Receiver
Mounting
Bracket
7. MAKING THE ELECTRICAL CONNECTIONS
WARNING: To avoid possible electrical shock, be sure electricity is turned o at
the main fuse box before wiring.
WARNING: Installation of this fan requires that a three-conductor cable (includ-
ing ground wire) should run between ceiling and wall outlet box.
WARNING: Check to see that all connections are tight, including ground, and
that no bare wire is visible at the wire nuts, except for the ground wire.
Insert the receiver into the mounting bracket with the at side of the receiver
facing the ceiling. (Fig. 12)
Follow the steps below to connect the fan to your household wiring. Use the
plastic wire nuts with your fan. Secure the plastic wire nuts with electrical tape.
Make sure there are no loose strands or
connections.