Installation Sheet

10FR-W1805

6. HANGING THE FAN (cont.)

1. Slip the coupling cover, canopy screw cover (painted side face

down), and canopy (opened side up) onto the downrod. (Fig. 10).

Coupling cover goes all the way to the bottom.

2. Carefully reinstall the hanger ball onto the downrod, being sure

that the cross pin is in the correct position, the setscrew is

tightened and wires are not twisted. (Fig. 10)

FIGURE 10

Downrod

Coupling Cover

Motor wires

Canopy

screw cover

Safety cable