Installation Guide

FR-W1803-52Axis Instructions22
8. Installing the LED Luminaire Module/Cover
WARNING: Before starting installation, disconnect the power
by turning off the circuit breaker or removing the fuse at fuse box.
NOTE: If you do not plan to install the optional luminaire module with
your fan at this time, skip to step 5.
1. Remove 1 screw from the adapter plate for future use and loosen
the two others from the outer perimeter of the adapter plate and
keep for future use.
2. Raise and hold the LED luminaire module close to the mounting
plate and proceed to secure the wire connections. Connect the
white wire connectors from the luminaire module to the white
wire of the fan. Connect the blue wire from the fan to the blue
wire from the LED module (Fig. 8).
3. Twick-lock into place and secure with the 1 previsouly removed
screw and tighten the 2 others.
4. Raise glass shade up against the luminaire module,
and secure it to fan by turning glass clockwise until snug.
Do not over-tighten (Fig. 8A).
5. If installing the optional luminaire cover, make sure it is securely
tightened (Fig. 8A).
NOTE: Add metal light cover if you do not need lighting function or
prefer a different aesthetic (Fig. 8A).
NOTE: Do not connect the LED connector wires if you are using
the metal light cover.
LED Luminaire installation is optional