Installation Guide

INSTALLATION INSTRUCTIONS
ARGO
FM-4407, FM-4411
4
.
5.
INSTALLATION
Uses 3”, 4", or a combination 3/0-4/0 junction box.
1. Install the mounting plate to the junction box using the
junction box screws provided.
NOTE: Carefully align the slots on the mounting plate
with the direction you want your fixture to be in to
prevent uneven installation.
2. Provide electrical service according to the
“National
Electrical Code” or your local electrical code to the
outlet box.
3.
Clip the retention cable into the retention cable slot
on the mounting plate to assist with wiring.
Connect supply wires to fixture wires and insulate with
proper wire nuts.Connect incoming ground wire to
mounting plate ground wire (green or bare). Connect
incoming common wire to fixture common (white).
Connect incoming hot wire to fixture black wire.
Raise the fixture to the junction box, guide the spring
clips into the slots in the mounting plate and press the
front of the fixture firmly in the center to lock the fixture
in place.
Note: To ensure an easier installation, guide the
spring clips through the slots on one side first before
guiding the spring clips on the other side. Push all four
clips in simultaneously.
3", 4" or 3/0-4/0 Junction Box
Junction Box Mounting
Screw Retention Cable Slot
Mounting Plate Slot
Mounting Plate
Wire Connector
Fixture
Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JAN 2019
2
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Modern Forms
www.modernforms.com
Phone [phone] • Fax [phone]
Fig. 1