Installation Guide

INSTALLATION INSTRUCTIONS
ARGO
FM-4207, FM-4211, FM-4215, FM-4219
Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program. Feb 2019
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Modern Forms
www.modernforms.com
Phone [phone] • Fax [phone]
Fig. 1
1.
Install the provided mounting plate to the junction box using
the junction box screws provided.
4.
5.
Fixture
INSTALLATION
Uses 3” junction box, 4" junction box or a combination
3/0-4/0 electrical box.
Wire Connector
2. Provide electrical service according to the “National Electrical
Code” or your local electrical code to the outlet box.
3.
Clip the retention cable into the retention cable slot
on the mounting plate to assist with wiring.
3", 4" or 3/0-4/0 electrical
box, (by others)
Retention Cable Slot
Mounting Plate
Connect supply wires to fixture wires and insulate with
proper wire nuts:
Connect incoming ground wire to mounting plate ground wire
(green or bare).
Connect incoming common wire to xture common (white).
Connect incoming hot wire to xture black wire.
Raise the fixture to mounting plate and guide the
metal clips through the openings in the
mounting plate until the fixture is flush with the
mounting surface.
6.
Rotate the fixture clockwise until fully tightened
with the mounting surface.
Junction Box
Mounting Screw