Installation Sheet
Modern Forms
www.modernforms.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEPTEMBER, 2014
FIG.1
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary
for installation.
MOUNTING THE FIXTURE (Fig. 1)
3. Remove the xture side screws (L1) from the xture backplate (K1), and keep them for re-tighten the xture.
4. Unplug the male end connector (N1) from female end connector (M1).
5. Connect the transformer input wires (G1) to junction box wires as shown in Fig. 2, making sure that all wire connectors (A1)
are secured. If your outlet box has a ground wire (green or bare copper), connect the xture’s ground wire to it. After wires are
connected, tuck them carefully inside the junction box.
CONNECTING THE WIRES (Fig. 2)
6. Secure mounting backplate (K1) to the junction Box (E1) using junction box screws (B1).
7. Secure the mounting backplate (K1) to wall using the screws (D1) and the plastic anchors (C1).
8. Reverse the step 4, connect the xture’s wires to the transformer’s output wires with the male end connector (N1)
and female end connector (M1).
COMPLETING THE INSTALLATION (Fig. 1)
9. Place the xture’s front plate (J1) over the mounting back plate (K1)
and secure with screws (L1).
100%-10% DIMMING
COMPATIBLE WITH THE FOLLOWING ELECTRONIC
LOW VOLTAGE (ELV) DIMMERS
LUTRON DVELV-300P, SELV-300P
LEVITON VPE04
E1
A1
G1
F1
C1
K1
D1
B1
L1
B1
D1
L1
M1
J1
N1
C1
INSTALLATION INSTRUCTION
Neo
WS-3718, WS-3724, WS-3736, WS-3712, FM-3712
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig.2 Wiring