Installation Sheet

2
INSTALLATION INSTRUCTIONS
FM-25814/FM-3214
Phone [phone]
Fax [phone]
44 Harbor Park Drive
Port Washington, NY 11050
1600 Distribution Ct
Lithia Springs, GA 30122
1750 Archibald Avenue
Ontario, CA 91760
including the crossbar.
area. Be careful not to lose any small parts necessary for installation.
4. Secure the mounting ring to the junction box using standard junction
box screws that comes with the junction box.
the side of the mounting plate marked “GND” must face out.
making sure that all wire connectors (A) are secured. If your
outlet box has a green or bare copper ground wire, connect
wire directly to the mounting plate using the “GND” screw provided.
After wires are connected, tuck them carefully inside the junction box.
6. Secure the back plate to the mounting ring using the assembly screw .
7. Place the sparking glass into the bracket, secure them to the back plate
with mounting screw (B) .
Black or
Smooth
White or
Ribbed
Bare wire
(Ground)
Black
(Hot)
White
(Neutral)
Green or Bare Copper
(Ground)
258/32-LED Flush Mount
Sparkling Glass
RPL-GLA-25814
（for FM-25814 )
Junction Box
Wire Connector
Junction Box Screw
Ground wire
Back plate
Mounting Ring
Assembly Screw
White Mitered Glass
RPL-GLA-3214
（for FM-3214)
Mounting Screw
Bracket
White wire
Black wire