Installation Guide

2
INSTALLATION INSTRUCTIONS
258-LED Flush Mount
FM-25814
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig. 2 Wiring
Fig. 1
modernforms.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous impro
vement program. Feb 2019
JANUARY, 2017
modernforms.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
PREPARATION
1. Shut off the power at the circuit breaker and remove existing fixture,
including the crossbar.
2. Carefully unpack your new fixture and lay out all the parts on a clear
area. Be careful not to lose any small parts necessary for installation.
MOUNTING THE FIXTURE (Fig. 1)
3. Remove the mounting ring from the fixture.
4. Secure the mounting ring to the junction box using the screws
provided with the junction box.
N
OTE: The side of the mounting plate marked “GND” must face
out.
CONNECTING THE WIRES (Fig. 2)
5.
Connect the fixture’s wires to house wires as shown (Fig.3).
Make
sure that all wire connectors (A) are secure. If your
outlet box has a green or bare copper ground wire, connect
the fixture’s ground wire to it. Otherwise, tuck the fixture’s
ground wire directly to the fixture. After wires are connected,
tuck them carefully inside the junction box.
COMPLETING THE INSTALLATION
6. Secure the back plate to the mounting ring using the assembly screw.
7. Place the sparking glass into the bracket, secure it to the back plate with mounting screw (B).
Junction Box
Screw
Assembly
Screw
Sparkling Glass
RPL-GLA-25814
Mounting Screw
B
Junction Box
Mounting Ring
Black Wire
White Wire
Wire Connector
A
Ground Wire
Bracket
Back Plate
Mounting Ring Dimensions
∅4"
1
3
4
"
1
3
8
"
G
N
D