Installation Sheet

Modern Forms
www.modernforms.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program. DECEMBER, 2014 2
PREPARATION
1. Carefully unpack your new lamp, lay out all the parts on a clear
area. Be careful not to lose any small parts.
2. Place the body support (B1) onto the base (C1).
Assemble them using screws (E1).
3. Make sure the base direction is aligned with arms.
4. Connect power supply (A1) with body support (B1)
5. Plug into outlet.
6. Adjust the arm location as desired.
7. This lamp features a touch dimmer.
To choose desired brightness:
1st tap – Turn on
2nd tap – Brighter
3rd tap – Max. Brightness
4th tap – Turn o
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the
other) on power supply (A1) as a safety feature to reduce the risk of
electric shock. This plug will t a polarized outlet only one way.
If the plug does not t fully in the outlet, reverse the plug.
If it still does not t, contact a qualied electrician. Never use with
an extension cord unless the plug can be fully inserted.
Do not change or alter.
Switch
Power
Supply
Body
Support
Base
Screws
A1
B1
C1
E1
INSTALLATION INSTRUCTION
Flat - Floor Lamp
FL-1150