Installation Guide

FH-W200414

1. Connect the wires from fan to the corresponding wires on

the receiver.

2. Connect the wires from the outlet box to the corresponding

wires on the receiver.

NOTE: Follow wiring diagram found on the receiver hardware.

After making electrical connections, spliced connectors should be

turned upward and pushed carefully up into the outlet box. The

wires should be spread apart with the grounded conductor and the

equipment-grounding conductor on one side of the outlet box and

ungrounded connector on the other side of the outlet box.

WHITE (NEUTRAL)

OUTLET BOX

BLACK (HOT)

BLACK (“AC IN L”)

RED (TO MOTOR)

GRAY (TO MOTOR)

YELLOW (TO MOTOR)

YELLOW (MOTOR)

GRAY (MOTOR)

RED (MOTOR)

RECEIVER

GREEN (GROUND)

TO HANGER BALL

GREEN (GROUND)

TO HANGER BRACKET

GREEN (GROUND)

WHITE (FOR LIGHT)

BLUE (FOR LIGHT)

WHITE (“AC IN N”)

GREEN (GROUND)

Making the Electrical Connections