Installation Guide

FH-W2003
Slim Instructions14
1. Remove 2 opposing screws and loosen the others.
2. Pass supply wires through mounting plate.
3. Lift motor assemby and hang it on the hook on the
mounting plate using one of the screw holes (Fig.5).
4. Secure the safety cable into the structure beams using the wood
screw, washer, and spring washer provided.
NOTE: Safety cable is required for all installations in Canada. Safety
cable is required for ceiling fan and light combinations over 35 lbs. in
both ush and downrod models in the United States.
5. Hanging the Fan