Installation Guide

FH-W2003
Slim Instructions12
2. Installing the Mounting Bracket
Remember to disconnect the power at the circuit breaker.
1. (Fig. 2) Illustrates how to mount the mounting bracket.
2. Remove 1 set screw from mounting bracket and set aside
for use in Finishing the Installation.
3. Pass supply wires through mounting bracket and secure to
outlet box.
1. Place blade on motor and secure with the blade attachment,
screws and washers.
2. Insert blades in slots, aligning with motor assembly holes.
3. Secure blades with blade attachment screws & washers (Fig. 3).
1. Remove 3 screws from the top of the motor housing and
place the decorative trim ring on the body of fan housing
as shown (Fig. 1).
NOTE: It is recommended to place a soft cloth underneath
the trim ring so it doesn’t scratch the nish surface.
2. Reattach the motor housing by re-installing the 3 screws (Fig. 2).
3. Attaching the Fan Blade
4. Adding the Decorative Trim Ring