Installation Guide

FH-W1811
Aviator Flush Instructions8
Package Contents
7. Control Receiver
w/Hardware
F-R3-1811-054
8. Wall Control w/Hardware
F-WCBT-WT
• 3/16” x .375”
Flat head screws (5)
• 4x9mm Flat head
screws (10)
• 1/4” x 16mm Pan head Philips
screws with
washer (7)
• 5.2x8.4x1mm Spring washer (1)
Hardware Bag
RPL-AVIATORFH-PART
1. Blade Set of 3
RPL-F1811-54-BD-**
2. Blade Collector Ring
3. Hanger Plate
RPL-F1811-HANGER-**
4. Hanger Gasket
5. Motor Assembly
6. Bottom Cap (Aluminum)
RPL-F1811-54-CA-**
Before discarding packaging materials be certain all parts have been removed.
Place the parts from the hardware bag into a small container to keep them from being lost.
• 6.5x19x2mm Flat
washer (1)
• #10x76mm Pan head Philips
wood screw (1)
• #10x38mm Pan Head Phillip
Screws (2)
• Ø5*14*1mm Flat Washer (2)
• 3/16” Star Washer (2)
** denotes nish code of fan *** denotes blade sweep of fan