Installation Sheet

15FH-W1811
11. INSTALLING THE LED LUMINAIRE
MODULE (Optional Accessory)
1. Remove the three screws from the LED wire storage cap, keep the
cap for future use when not using the luminaire (Fig. 14).
2. Install the LED mounting plate using 3 screws removed from step
1 (Fig. 15).
3. Raise and hold the LED luminaire module close to the adapter
plate and proceed to secure the wire connections. Connect the
white wire connector from the luminaire module to the white
wire of the fan. Follow the same procedure with the black wire
connectors (Fig. 16).
4. Seat the LED luminaire onto LED mounting plate using 3 screws
provided with LED luminaire (Fig 17).
5. Install glass shade by turning it clockwise until it locks securely
(Fig. 18).
FIGURE 18
FIGURE 14
FIGURE 15
FIGURE 16 FIGURE 17
1. CAUTION: To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing light kit.