Installation Sheet

14FH-W1811
10. FINISHING THE INSTALLATION
1. Secure all wire connections with supplied wire ties to assist in fan
installation.
2. Tuck connections neatly into ceiling outlet box.
3. Remove the motor assembly from the hook on the mounting
bracket. Position the motor up to the hanger plate and attach us-
ing two screws through the two key slots in the top of the motor
housing (Fig. 13).
Note: Make sure the receiver sits at and does not interfere with
the hook.
4. Align the remaining two circular holes on motor housing with
the two holes on the hanger plate. Secure by tightening the two
screws.
FIGURE 13