Installation Sheet

11FH-W1811
9. MAKING THE ELECTRICAL CONNECTIONS
WARNING: To avoid possible electrical shock, be sure electricity is
turned o at the main fuse box before wiring.
WARNING: Installation of this fan requires that a two-conductor cable
with ground wire be run between ceiling and wall outlet box.
WARNING: Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire nuts, except for the
ground wire.
If you feel you do not have enough electrical wiring knowledge or
experience, have your fan installed by a licensed electrician.
Insert the receiver into the mounting bracket with the at side of the
receiver facing the ceiling. (Fig. 13)
Follow the steps below to connect the fan to your household wiring.
Use the plastic wire nuts with your fan. Secure the plastic wire nuts
with electrical tape. Make sure there are no loose strands or
connections.
FIGURE 9