Instructions / Assembly

F-056/F-056L

21 22 23

WACFan_841812

14 RESET

Factory Reset

Press and hold buttons for 10 seconds

Receiver Factory Reset

Press the reset button on the receiver

until the receiver beeps

NOTE: If advised by technical support, you can reset your fan to factory settings by

either holding down the light toggle, fan toggle, and season button for 10 seconds or

briey depressing the reset button on the fan’s receiver. The fan will emit three beeps

indicating the reset was successful.

NOTE: Factory reset will remove remote control(s), wall control(s) and WAC

app connections.

NOTE: If you change your Wi-Fi settings

(SSID or Security Passphrase you will need

to perform a Wi-Fi reset on the fan by

holding down the fan speed up and fan

speed down buttons on the remote control

for 10 seconds. The light on the remote

will ash green and the fan will sound two

long beeps. You can then use the Modern

Forms Fans app to connect your fan to the

new network.

Fan Wi-Fi Reset

Press and hold the and for 10 seconds until LED

blinks green and receiver emits 2 long beeps