Installation & Assembly

2Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
modernforms.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTION
666 - LED Wall Sconce
WS-66641
PREPARATION
1. Shut o the power at the circuit breaker and remove existing
xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on
a clear area. Be careful not to lose any small parts necessary
for installation.
CONNECTING THE WIRES Fig. 2
3. Remove the mounting screw (C1) from the xture.
4. Connect the driver input wires with junction box wires as
shown in Fig. 2, making sure that all wire connectors (A1)
are secured. If your outlet box has a green or bare copper
ground wire, connect the xture’s ground wire to it.
Otherwise, connect the xture’s ground wire directly to the
mounting plate using the green screw provided. After wires
are connected, tuck them carefully inside the junction box.
*Require Driver to be recessed within the junction box.
MOUNTING THE FIXTURE Fig. 1
5. Secure mounting plate to the junction box using junction
box screws (B1), the side of the mounting plate marked “GND”
must face out.
6. Drill a hole in the wall aligned with the screw tube located on
the xture tail, insert the plastic anchor (D1), fasten the wood
screw (E1) and the iron studs (H1) to the plastic anchor.
7. Insert the crystal onto the xture, secure it with screw (J1).
8. Place the xture over the mounting back plate and secure it
with mounting screws (C1).
9. Insert the screw tube to the iron studs, fasten it with
Allen screw (G1) using the Allen Wrench (F1).
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig. 2 Wiring
C1
A1
B1
E1
H1
D1
G1
F1
J1
Mounting Screw
Wire Connector
Junction Box Screw
Wood Screw
Iron Studs
Plastic Anchor
Allen Screw
Allen Wrench
Screw Tube
4”
5 1/2”
Fixture
Driver
Mounting Backplate
Junction
Box
Ground Wire
Screw
Red Wire
Black Wire
White Wire
Black Wire
FIG.1
Back Plate Dimensions
3 1/2”