Installation & Assembly

2Modern Forms retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
modernforms.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTION
306 LED Wall Sconce
WS-30612/WS-30618/WS-30624
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
CONNECTING THE WIRES (Fig. 2)
3. Drill a hole in the wall aligned with the key-hole located in the mounting plate, insert the plastic anchor (C1) to the wall.
4. Connect the driver input wires to junction box wires as shown in Fig. 2, making sure that all wire connectors (A1) are secured. If your outlet
box has a green or bare copper ground wire, connect the xture’s ground wire to it. Otherwise, connect the xture’s ground wire directly to
the back plate using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
*Requires driver to be recessed within the junction box.
MOUNTING THE FIXTURE (Fig. 1)
5. Secure the mounting plate to the junction box using junction box screws (B1), secure it to the wall using the wood screw (D1).
The side of the mounting back plate marked “GND” must face out.
6. Twist lock the metal plate onto the xture.
7. Place the xture on the mounting plate, and secure it with mounting screw (E1).
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig. 2 Wiring
FIG.1
Back Plate Dimensions
D1
B1
E1
A1
C1
Wood Screw
Junction Box Screw
Fixture
Metal Plate
Mounting Screw
Wire Connector
Ground Wire
Junction Box
Supply Wire
Driver (Input)
Mounting Plate
Ground Wire Screw
Plastic
Anchor
4”
WS-30612 2 1/2”
WS-30618 3”
WS-30624 4 1/2”
WS-30612 6”
WS-30618 7 3/4”
WS-30624 11 3/4”