Specification Sheet

Galvanized Dark Bronze
FAN FINISHES
Industry DC
Dark Bronze with
Mahogany Blades
and 272 LED
Light
Dark Bronze with
Maple Blades
(no light)
Galvanized with
Silver Blades
(no light)
D O W N R O D S
The Industry DC ships standard with 2.5”
and 9.25” down rods. Use the following part
numbers to order accessory down rods.
Finish Length
#DRD –
–
 
GV
Galvanized
12
12”
DB
Dark Bronze
24
24”
36
36”
48
48”
60
60”
72
72”
INDUSTRY DC CONTROLS
Our DC fan controls use RF transmission to a receiving unit included with each fan,
providing six speeds, reversing and light function (on/off or dimming). Includes universal
or dedicated channel selection and master power switch on wall control (if ordered).
Control selection is made at time of order and incorporated into fan item number.
SLOPE ADAPTER
The Industry DC will accommodate ceiling
slopes up to 33 degrees. The #045
slope adapter can accommodate slopes
exceeding 33 degrees and up
to 45 degrees.
Finish
#045 –

GV
Galvanized
DB
Dark Bronze
The Modern Fan Co. tel [phone] toll free 888-588-3267 email [e-mail] website modernfan.com
Wall Control (WC)
Remote Control (RC) Wall/Remote Combo (CC)
* The Industry DC fan must use one of the above control options. Third party fan controls
are not compatible with this product. The Remote Control (RC) can be used in combination
with a standard power switch (on-off) in wall box.
** For ordering guidance to replace lost or damaged control components or to add
secondary control to existing control sets (e.g. to add a handset to an existing wall control
system), contact Modern Fan Co. customer support.
PLYWOOD BL ADES
Plywood blades are constructed of furniture grade veneers, painted or stained as
shown here. Natural variations may exist in woodgrains and finishes.
Graywash MahoganyMapleSilver Black
White
Whitewash