Model：CM2 Bluetooth wireless sound system with Light show Instruction Manual 0
IMPORTANT SAFETY INSTRUCTIONS 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with a dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Audio Output connection Bluetooth operation ………………………………….………………………6 Pairing a Bluetooth Device for the First Time Playing Audio Wirelessly USB Player operation ………………..………………………………………7 Listening to the radio Setting the radio station presets Auxiliary operation ………..……………………………….…………………7 AUX IN Connection AUX OUT Connection Party Lighting ..…………………..………………………….………………..8 Specifications …………..………………………………………………..……8 Trouble Shooting ……………………………………..…………………..…..
Orientation Front Features & Controls Rear input & Controls 4
General operations This unit operates on a built-in Li-ion battery that can be recharged either using the USB port on your computer or from a USB power adaptor (not included) with a rated output of DC 5V/1.2A and up. Power Connection Requires a Micro-USB to USB cable (included) 1. Using a Micro-USB to USB cable (included), connect the larger USB plug to the USB port of a powered on computer or USB power adaptor. Note: Be sure the computer is not sleep mode. 2.
RECHARGING THE INTERNAL BATTERY After prolonged use, the internal battery will become weak and the operation may become intermittent. When the internal battery charge is low, the BATTERY INDICATOR will show “ON and FLASH” alerting you to recharge the internal battery as soon as possible. Note: 1. Charging time will vary if you are listening to music while charging the internal battery. We recommend you switch off the unit power during the charging process. 2.
due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the above steps. Playing Audio Wirelessly 1. After pairing to a Bluetooth device, use the native controls on the connected Bluetooth Device or press the BLUETOOTH button of the unit to select a track. 2. Play, pause a selected track using the native controls on the connected Bluetooth Device. 3. Audio played through the connected Bluetooth Device will now be heard through the speakers. 4.
AUX OUT Connection 1. 2. 3. Please follow the steps below to connect audio signal from the unit to your home audio system. Locate the multi-colored RCA cables (not included). Connect audio cable’s 3.5mm plug to the AUDIO OUT jacks of the back side of your unit. Connect the other ends of the audio cable’s white and red plugs to the external unit’s audio input white and red jacks Party Lighting Slide the POWER ON/OFF switch on the rear of the unit to ON to turn on the unit and the party light Show.
Trouble Shooting PROBLEM POSSIBLE CAUSE REMEDY The USB power adaptor (not included) is not plugged into a wall outlet or the USB cable (include) is not plugged into the mini USB jack on the unit. Plug the USB power adaptor (not included) into a wall outlet and plug the USB cable (included) into the mini jack on the unit. Wall outlet is not functioning. Plug another device into the same outlet to confirm the outlet is working. Computer USB port is not functioning.
10
