User's Manual
Plug one end of a 3.5mm audio input cable (not included) into the AUX IN input on the rear of
the unit, and plug the other end of the cable into the audio output on the external music
player or other source.
Note: Make sure your external music player is turn ON.
Press the STANDBY buon to power the unit on and Power indicator will light up.
Start playing the device you plugged into AUX IN input. Their output is mixed with playback
from BLUETOOTH, USB PLAYER or MIC IN.
Slowly adjust both the volume controls of the unit and the external device unl you reach a
comfortable listening level.
Press STANDBY buon again to turn off the unit. Remember to shut down the external player
power.
1.
2.
3.
4.
5.
AUX-in OPERATIONS
USING SHOULDER STRAP
You can play other music sources (iPod, MP3 or other digital audio players) through the speakers of this
unit by connecng the AUX IN JACK to your external player’s audio out jack or headphone jack
Use SHOULDER STRAP (included) to connect right and le BELT CLIP on top side of unit. You can easy to
carrying.
If you are connected to the Line Out Jack of your external device then you only need to adjust
the volume control on the unit. If you’re connected to the Headphone Jack of your external
device, then you may need to adjust both the volume control of your external device and the
BC10 to obtain the most desirable volume seng.
If you use AUX IN funcon when playing Bluetooth audio, AUX IN audio will be mixed when
the audio cable is plugged in. Unplugging the audio cable will resume Bluetooth audio. We
suggest you to stopped playback or disconnected the Bluetooth device when playing music
via Line In mode.
NOTE:
E7