Instruction Manual Bluetooth wireless sound system English ..................... E1-E10 Thank you for purchasing iDance Audio System. PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WHAT’S IN THE BOX Contents 1. iDance BC1 main unit 2. Power Adaptor (12V DC / 2.5A) 3.
WARNINGS The exclamation mark inside an equilateral triangle is intended to alert user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol inside an equilateral triangle is intended to alert User of the presence of un-insulated " hazardous voltage" within the product’s enclosure, which may be of sufficient magnitude to induce a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
FEATURES Supports Bluetooth wireless audio streaming Supports A2DP profile(Advanced Audio Distribution Profile) Supports automatic device pairing Wireless range: 33 feet Built-in USB Player USB charger for smart phone/tablet 3.5mm Aux input 6.
CONTENTS CONTROL LOCATION ..................................................................E1-E2 GENERAL OPERATION ..................................................................E3-E5 BLUETOOTH OPERATION / USB PLAYER OPERATION ........................E6 AUX-IN OPERATION ....................................................................... E7 CHARGING YOUR PORTABLE DEVICE / ENERGY SAVING ...................E8 TROUBLESHOOTING .......................................................................
CONTROL LOCATION (1.1) FRONT Panel 1 5 6 2 7 3 8 4 9 1. Handle 2. LCD Display 3. SKIP +/- Button Press to skip the previous or next song to a device. (For USB Player only) 4. PLAY/PAUSE Button Press to play or pause the current tracks (For USB Player only) 5. VOLUME Control Turn to adjust the volume up or down 6. STANDBY Press to Power the unit on or off 7. Pairing Indicator 8. PAIRING Press and hold to begin pairing a bluetooth device 9.
CONTROL LOCATION (1.2) REAR Input & Control 1 2 3 4 6 7 5 8 9 1. MIC Input 1, 2 2. GUITAR Input 3. AUDIO Output Connect to external amplifier 4. MIC Volume Turn to adjust the MIC sound level up or down 5. POWER Switch Switch to power on or off the unit 6. AUX Input 7. DC Input 8. USB CHARGER Connect to other portable device you wish to charge 9.
GENERAL OPERATIONS Power Connection Before using your Bluetooth wireless sound system, you should connect a power adaptor with a rated output of DC 12V/2.5A and up to AC (mains) power. 1. Firmly and securely insert the DC plug of the adaptor to the DC IN jack on the rear of the unit. 2. Plug the adaptor’s AC plugs into an AC outlet. 3. Power on the unit by switching the POWER switch on the rear of the unit. The Pairing indicator will light up in RED to indicate the unit is in standby mode.
GENERAL OPERATIONS RECHARGING THE INTERNAL BATTERY After prolonged use, the internal battery will become weak and the operation may become intermittent. When the internal battery charge is low, the BATTERY INDICATOR will show low level alerting you to recharge the internal battery as soon as possible. NOTE: 1. Charging time will vary if you are listening to music while charging the internal battery. We recommend you switch off the unit power during the charging process. 2.
GENERAL OPERATIONS Guitar Connection Plug the 6.3mm Guitar plug (or other Hi-Z instrument) into the GUITAR IN jack on the rear side of your unit. Their output is mixed with playback from BLUETOOTH, USB PLAYER or AUX IN. AUDIO OUTPUT Connection Please follow the steps below to connect audio signal from the unit to your home audio system. 1. Locate the RCA cables (not included). 2. Connect audio cable’s white and red plugs to the white and red AUDIO OUT jacks of the back panel of your unit. 3.
BLUETOOTH OPERATIONS Pairing a Bluetooth Device for the First Time 1. Power on the unit by press the STANDBY button, LCD display will appear “PAIRING” and Pairing indicator will light BLUE and flash, press and hold the PAIRING button for about 5 seconds. When pairing, remain within 3 feet of the unit. 2. Using the native controls on your Bluetooth device, select the BC1 in your Bluetooth settings to pair. If your device requests a password, enter the default password “0000”.
AUX-in OPERATIONS You can play other music sources (iPod, MP3 or other digital audio players) through the speakers of this unit by connecting the AUX IN JACK to your external player’s audio out jack or headphone jack 1. Plug one end of a 3.5mm audio input cable (not included) into the AUX IN input on the rear of the unit, and plug the other end of the cable into the audio output on the external music player or other source. Note: Make sure your external music player is turn ON. 2.
CHARGING YOUR PORTABLE DEVICE This unit features a USB “CHARGER” port for charging your portable device (iPod, iPhone, Android phone, etc.) when used with the USB charging cord that came with your device. 1. Connecting a power adaptor (see “Power connection”) into the main unit. USB “CHARGER” port can’t control to off by main power switch of the unit. 2. Plug one end of the USB cable (not included) into the USB ”CHARGER” Port located on the back of the unit.
TROUBLESHOOTING PROBLEM No Charging POSSIBLE CAUSE AND SOLUTION Portable device battery has problem. Remove your portable device from the charging cord and check for obstruction on the connectors. Please make sure your portable device is working properly before plugging into the unit. Please refer to your portable device manual for details. Power Adaptor disconnected or loose. Check the connection or the Power Adaptor. The AC outlet has not power. Try the unit on another outlet. Volume set too low.
SPECIFICATIONS Power Requirement: AC/DC Adaptor AC Input 100-240V ~50/60Hz DC Output DC 12V 2.5A Bluetooth: Bluetooth Specification version 2.1 Support profile A2DP USB Player: Support USB flash drive up to 16GB DC5V 200mA USB Charging DC 5V 1A Microphone 600 Ohm Impedance w/6.3mm Dynamic microphone Audio Power output: 15 W (RMS) Speaker: 4 Ohms. 10.2 cm. x1 4.1 cm. x1 Dimensions: 25.5 cm(H) x 20.2 cm(W) x 20.2 cm(D) Weight: 1.
