User Manual

BLUETOOTH
BLUETOOTH SETUP
1.) Power on the unit by pressing the ON/OFF button.
2.) Press the FUNCTION button to switch to Bluetooth mode. The display will show the flashing letters “bt”.
3.) “ bt “ will flash quickly on the display.
When pairing, remain within 3 feet of the unit.
If the unit does not automatically begin to pair, press
and hold the PAIRING button.
4.) Using the native controls on your Bluetooth device, select
the “Singing machine” in your Bluetooth settings to pair.
If your device requests a password, enter the default
password “0000”.
Refer to the user’s manual for your specific device for
instructions on pairing and connecting Bluetooth device.
5.) When successfully paired, the display will stop flashing.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the devices.
If your device should become unpaired, follow the above steps again.
If any pairing issues should occur, un-pair the unit on your Bluetooth device and follow the above
steps again.