iSM990BT Bluetooth
PAIRING button
BLUETOOTH
BLUETOOTH BLUETOOTH SETUP 1.) Power on the unit by pressing the ON/OFF button. 2.) Press the FUNCTION button to switch to Bluetooth mode. The display will show the flashing letters “bt”. 3.) “ bt “ will flash quickly on the display. When pairing, remain within 3 feet of the unit. If the unit does not automatically begin to pair, press and hold the PAIRING button. 4.) Using the native controls on your Bluetooth device, select the “Singing machine” in your Bluetooth settings to pair.
PLAYING MUSIC VIA BLUETOOTH 1.) Follow the instructions for Pairing a Bluetooth Device. 2.) Use the native controls on the connected Bluetooth Device to select a track. 3.) To play, pause or skip the selected track, use the native controls on the connected Bluetooth Device or press the PLAY/PAUSE, SKIP button of unit. 4.) Audio played through the connected Bluetooth device now be heard through the speaker.
No sound when playing audio via Bluetooth Your Bluetooth device has been paired properly. The volume control of your Bluetooth device is set at too low. The volume control of the Bluetooth speaker is set at too low. Pairing your Bluetooth device according to the " PAIRING YOUR BLUETOOTH DEVICE" section. Increase the volume of your Bluetooth device. Increase the volume of the unit by tune the volume knob to "+".
BLUETOOTH SECTION SUPPORT A2DP / AVRCP 2.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
