User's Manual

9
2. Press the SOURCE button to select FM band, the FM frequency will show on
LCD display.
3. Use the
TUNE+ / SKIP+
or
TUNE– / SKIP–
button to select the desired radio
station. If you press and hold the TUNE+ / SKIP+ or TUNE– / SKIP– button for 2
seconds, then release, the unit will automatically scan to the next broadcasting
station.
4. The broadcasting radio frequency will be displayed for about 5 seconds before
reverting to the clock time.
5. Press the
button to turn the radio OFF.
TO SET/RECALL RADIO STATION PRESETS
1. Press the
button to turn the unit ON.
2. Press the SOURCE button to select FM band, the FM frequency will show on
the LCD display.
3. Use the
TUNE+ / SKIP+
or
TUNE– / SKIP–
button to select the desired radio
station.
4. Press the MEM / CLK button to enable the program function and the preset
channel number “P01” indicator will show on the LCD display and flashing.
5. Press the TUNE+ / SKIP+ or TUNE– / SKIP– button to enter the desired
channel number of program.
6. Press the MEM / CLK button to confirm memory.
7. Repeat above steps #3 thru #6 to preset up to 20 stations for FM band.
8. To retrieve one of the preset stations already programmed, press
button until you reach the desired preset number/radio station.
LINE IN OPERATION
This unit provides an auxiliary audio signal input jack for connecting external audio
devices like MP3 players, CD players and listen to them through the speakers of this
unit.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the
cable.
2. Plug one end into the LINE IN Jack on the main unit and the other end of the
cable into the Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the unit and external audio device.
4. To select auxiliary audio input, tap the
SOURCE
button to select LINE IN mode.
“LINE IN” icon appears on display.
5. The volume level can now be controlled through the main unit. Operate all other
functions on the auxiliary device as usual.
NOTE:
If you connect this unit to the Line-Out Jack of your external device then you only
need to adjust the volume control of this unit. If you connected the Headphone Jack