UNDER CABINET UNIVESAL BLUETOOTH MUSIC SYSTEM SKCR2810BT USER MANUAL
CAUTION: Electrically Operated Product – Please use care when plugging into AC outlet. WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION Use of controls or adjustments or performance other than those specified may result in hazardous radiation exposure.
6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF AC ADAPTOR TO WIDE SLOT. FULLY INSERT. COMPLIANCE WITH FCC REGULATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PROTECT YOUR FURNITURE!! This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from nonmigrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture.
1 2 3 4 5 6 7 8 9 10 11 STANDBY button button SOURCE button TIMER button MEMORY / CLOCK button SKIP + / TUNE + button SKIP - / TUNE - button VOLUME + button VOLUME - button USB CHARGER SPACERS 12 BLUETOOTH 13 14 15 16 17 18 19 20 21 22 icon 5 FM icon LINE IN icon PM icon TIMER icon MEMORY icon LINE IN Jack DC IN Jack BATTERY COMPARTMENT SPEAKER (L) SPEAKER (R)
OPERATING INSTRUCTIONS POWER CONNECTION This product operates on 120V~ 60Hz power supply. Plug the AC Adaptor into a household outlet AC source. CONNECTING THE AC ADAPTER 1. Insert the DC plug of the AC adapter (included) into the DC Jack of the unit. 2. Fully insert the blades of the AC adapter (included) into the slots of a working wall socket as shown. 3.
SETTING THE DIGITAL CLOCK 1. In standby mode, press and hold the MEM / CLK button. The “12H” will blink. 2. Press the MEM / CLK button. The hour time digits will blink. or TUN- / SKIPbutton to set the current hour. 3. Press the TUN+ / SKIP+ Press and hold the button for fast to setting. Press the MEM / CLK button again to confirm and the minute time digits will blink. or TUN- / SKIPbutton to set the current minute. 4. Press the TUN+ / SKIP+ Press and hold the button for fast to setting. 5.
completed. 6. If you want SKCR2810BT change to pair with another Bluetooth device. Press button for about 4~5 seconds. The icon will flash, and hold the the melody will be heard to confirm the unit will go into Pairing/Discoverable mode again. Repeat steps 3 and 4. To connect previously paired Bluetooth device SKCR2810BT can store one previously paired device for quick pairing during power on.
2. Press the SOURCE button to select FM band, the FM frequency will show on LCD display. 3. Use the TUNE+ / SKIP+ or TUNE– / SKIP– button to select the desired radio station. If you press and hold the TUNE+ / SKIP+ or TUNE– / SKIP– button for 2 seconds, then release, the unit will automatically scan to the next broadcasting station. 4. The broadcasting radio frequency will be displayed for about 5 seconds before reverting to the clock time. 5. Press the button to turn the radio OFF.
of your external device then you may need to adjust both the volume control of your external device and the volume control of this unit to find the most desirable volume setting. RESETTING YOUR CLOCK RADIO If the system does not respond or exhibits erratic or intermittent operation, you may have experienced an electrostatic discharge (ESD) or a power surge that triggered the internal microcontroller to shut down automatically.
4. For better Clock Display clarity, avoid operating the unit under direct sunlight or in strong room illumination. 5. Unplug the unit from the electrical power outlet immediately in case of malfunction. SPECIFICATIONS Power Adaptor: Battery Back-up: AC input 120V~ 60Hz 2.5A DC Output 5V 2 x DC 1.5V UM-4 type batteries (not included) Bluetooth: Bluetooth Specification version 3.0 Support profile A2DP Frequency Range: FM 87.5 – 108 MHz Audio Power output: 1.5W (RMS) x2 USB Charging: DC 5V 2.
