USER’S GUIDE SRCD2731BT HOME MUSIC SYSTEM PLEASE READ BEFORE OPERATING THIS EQUIPMENT
Warnings and Precautions • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. • CAUTION: Use of any controls or adjustments or performance of procedures other than those herein specified may result in hazardous radiation exposure.
Important Safety Instructions 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Introduction STANDBY INDICATOR LED light up indicated Standby mode. CD COMPARTMENT OPEN/CLOSE Press to open or close the CD door. PAIRING/PLAY/PAUSE POWER Press to play or pause a loaded CD. Press & hold to begin pairing a Bluetooth device. Press to power the music system off or on. LCD DISPLAY STOP Press to stop a CD during play. EQ Press to switch the preset EQ to Pop, Jazz, Classic, Rock or Normal. SKIP/SEARCH/TUNE(+/-) Press to skip between tracks on loaded CD or Bluetooth.
PAIRING/PLAY/PAUSE Press to play or pause a loaded CD. Press & hold to begin pairing a Bluetooth device. STANDBY Pres to power the music system off or on. SOURCE Press to switch to CD, LINE IN, Radio or Bluetooth modes. SKIP/SEARCH/TUNE- Press to skip between tracks on loaded CD or Bluetooth. Press and hold to search through an individual track. Press to tune the FM radio. Press to adjust the time when setting the clock. MUTE Press to mute the volume. VOLUME Press to adjust the volume.
Setup Power Plug the included AC/DC power adapter into the DC POWER INPUT on the music system and an AC power outlet to power the music system. Battery Power RY CR2025 OPEN LIT HIU CR M B 2 AT 3V 025 TE PUSH Y ER TT BA M 25 IU 20 TH CR 3V LI CR2025 OPEN Requires 1, CR2025, battery (preinstalled). PUSH Clock Setting the Clock Press the MEM/CLK SET button to set the minute. The minute will begin to blink on the display. Press the POWER button to turn the music system off. 2.
CD Loading a CD 1. Press the OPEN/CLOSE button on the top of the music system to open the CD door. 2. Load a CD into the music system, label side facing up. 3. Close the CD door. Programming a CD 1. Follow the instructions for Playing a CD. 2. Press the STOP button. 3. Playing a CD 1. Follow the instructions for Loading a CD. 2. Press the POWER button to power the music system on. 3. Press the SOURCE button to switch to CD mode. The CD will playing automatically. 4.
FM Radio Tuning the FM Radio Saving an FM Radio Station 1. Press the POWER button to power the music system on. 1. Follow the instructions for Tuning the FM Radio. 2. Press the SOURCE button to switch to FM radio mode. 2. Press the TUNE +/- buttons to tune the FM radio to the desired station. “FM” will appear on the display. Press the TUNE +/- buttons to tune the FM radio. 3. Press the MEM/CLK SET button on on the music system or the MEM/CLK SET button on the remote. 3.
Bluetooth Pairing a Bluetooth Device for the first time 1. Press the POWER button to power the music system on. 2. Press the SOURCE button to switch to Bluetooth mode. “ ” will appear on the display and blanking. 3. Press and hold the PAIRING/PLAY/PAUSE button to begin pairing to a Bluetooth device, “ ” will flash quickly. 4. Using the native controls on your Bluetooth device, select the SRCD2731BT in your Bluetooth settings to pair.
Line in Using the 3.5mm Audio Input Requires a 3.5mm audio cable (not included). 1. Connect a 3.5mm audio cable to the LINE IN jack on the music system and the headphone jack or 3.5mm audio output on an MP3 player or other audio source. 2. Press the POWER button to power on the music system. 3. Press the SOURCE button to switch to LINE IN mode. 4. Use the native controls on the connected MP3 player or other audio source to control the music played through the music system.
Specification Power Adaptor: AC input 120V~ 60Hz DC Output 10.5V 1.5A Bluetooth: Bluetooth Specification version 2.1 Support profile A2DP FM 87.5 – 108 MHz 5W (RMS) x2 Frequency Range: Power output: Dimensions: Weight: 32 cm (H) x 72 cm (W) x 21 cm (D) ?? Kg.
