User's Manual

• OSD Language

Choose the language for the operating system.

1. Press the M+/CH+ or M-/CH- buttons on Main unit or Remote control to

select Config Menu, then press OK button to enter the following sub

menus.

Press M+/CH+ or M-/CH-buttonson Main unit or Remote control select

OSD Language, then press OK button to enter the following sub menus

and press buttons on Remote control to select English(Default) /

French / Portuguese / Spanish from the sub menu.

• Restore Factory Default

1. Press the M+/CH+ or M-/CH- buttons on Main unit or Remote control to

select System Menu, then press OK button to enter the following sub

menus.

2. Press M+/CH+ or M-/CH-buttons on Main unit or Remote control select

Restore Factory Default, then press OK button to enter the following sub

menus and press OK button again to confirm restore the TV to factory

default settings.

LUETOOTH OPERATION

ABOUT PAIRING

Pairing is the term used when two Bluetooth devices are connected

wirelessly for the first time. This allows the devices to see each other

and sets up a one to one communication channel between both

devices.

To begin pairing with a Bluetooth device

1. Press the POWERbutton to turn on the unit.

2. Press the SOURCE button to repeatedly to select Bluetooth mode and

the icon will displayed and flash on LCD, you will start pairing

process to connect to your Bluetooth device.

CC Display : Select CC OFF(Default) / CC1 / CC2 / CC3 / CC4 / CC5

/CC6to displayed on screen.

CC Position: Select AUTO (Default)/ Top / Bottom to displayed on

screen.

Font Color :SelectDefault / White / Black / Red / Green / Blue /

Yellow / Magenta / Cyan font colorto displayed on

screen.