User's Manual
12
Bluetooth Wireless
Using the Speakerphone
1. When a call is received, a ringtone will sound through the unit.
2. Press the
button to accept the call, or accept the call using the controls on the connected phone.
3. The incoming call received through the device will now be heard through the speaker.
4. To end the call, press the
button or end the call using the controls on the connected device.
Pairing to a Device & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the device. If your device should become unpaired or you nd it is unable to connect, repeat the
steps listed here.
1. Power the unit on and press the Source button to select
(Bluetooth). The pairing indicator on
the display will begin ashing slowly.
2. Hold the Pair button to begin pairing. The pairing indicator will begin quickly ashing blue. When
pairing, remain within 3 feet of the unit.
3. Using the controls on your Bluetooth device, scan for and select IKTD1016 in your Bluetooth
settings to pair. If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user’s manual for your specic device for instructions on pairing and connecting
Bluetooth devices.
4. When successfully paired, the pairing indicator will turn solid and an audible chime will sound
from the speaker.
5. Use the controls on the connected device to select and begin playing audio. Audio played through
the connected Bluetooth device will now be heard through the speaker.
6. Use the controls on the unit or the connected device to play, pause, and adjust volume.