Manualshelf

User's Manual

ManualsBrandsModern Electronics Factory ManualsAudio EquipmentPortable Bluetooth Tailgate/Trolley Speaker
12345678910
E‐8
WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
This product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does
not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
BLUETOOTH OPERATION
Pairing to a Device and Playing Audio
1. Press the POWER Switch to ON.
2. Press the SOURCE Button (#10) repeatedly to select Bluetooth mode.
Bluetooth indicator (#9) will light up.
3. Press and hold the PAIR Button (#16),
The SMPS-900 will enter pairing mode and the Bluetooth indicator (#9) will
begin flashing quickly.
4. Turn on Bluetooth function of your device and enable the search or scan
function to find JBS-600. (see your device’s instructions to add or setup a
Bluetooth device). Select "SMPS-900" from the device list when it appears on
your device screen. If required, enter the pass code “0000” to pair (link) SMPS-
900 with your device.
Refer to the user’s manual for your specific device for instructions on pairing
and connecting Bluetooth devices.
5. If you are pairing (linking) your computer to the speaker using Bluetooth, you
may need to set the SMPS-900 as your computer’s default sound device.
6. When successfully paired, the Bluetooth indicator will light steadily and an
audible chime will sound through the speaker.
7. If you want SMPS-900 change to pair with another Bluetooth Enable Device.
Repeat steps 3 to 4.
PLAYING FROM A BLUETOOTH DEVICE
You can play music from your Bluetooth device wirelessly to SMPS-900 after
successfully pairing.
1. Selecting your favorite song, press the PLAY button on your Bluetooth device
or the
PLAY Button
(#16) on SMPS-900 to play or pause the Bluetooth device
playback.
2. Slowly adjust both the VOLUME (#19) of your SMPS-900 and your Bluetooth
device until you reach a comfortable listening level.
Notes:
Your Bluetooth enabled device will not play the music through the speaker,
even if connected (linked), if the device does not support the A2DP Bluetooth
profile.
Remember to turn off the SMPS-900 when you have finished listening.
Don't forget to switch off the power of your external audio device as well.