User's Manual


E‐9
USB PLAYER OPERATION
1. Switch the POWER Switch (#21) to ON.
2. Press the SOURCE Button (#10) repeatedly to select USB mode. The USB
Indicator (#8) will light up.
3. Plug the USB flash driver into the USB port (#22) on the front of the unit. The
USB device will playing automatically.
4. During USB playback, press the PLAY/PAUSE Button (#16) to pause USB play
and press again to resume.
5. Press SKIP+ Button (#18) or SKIP- Button (#12) to select next or previous track.
6. Press and hold SKIP+ Button (#18) or SKIP- Button (#12) to search rapidly
within a track to locate a specific passage.
AUX OPERATION
You can play other music sources (iPod, MP3 or other digital audio players)
through the speakers of the SMPS-900 by connecting the AUX IN Jack (#6) to your
external player’s audio out jack or headphone jack.
1. Plug one end of an audio cable (not included) into the AUX IN Jack (#6) and the
other end of the cable to the headphone jack of your digital audio player.
2. Press the SOURCE Button (#10) repeatedly to select the AUX mode. The AUX
Indicator (#7) will light up.
3. Start playing the device you plugged into the AUX IN Jack (#6).
4. Slowly adjust both the volume controls of the SMPS-900 and the external device
until you reach a comfortable listening level.
5. Turn off your iPod, MP3 player etc. when finish listening.
6. Switch the POWER switch (#21) to OFF to turn the SMPS-900 off and unplug
the AUX IN Jack (#6).
Notes :
• If you connect the SMPS-900 to the Line-Out Jack of your external device, you
only need to adjust the VOLUME CONTROL of your SMPS-900. If you connect
to the Headphone Jack of your external device, you may need to adjust both
the volume controls of your external device and the SMPS-900 to obtain the
desirable listening level.
• Remember to turn off the SMPS-900 when you have finished listening. Don't
forget to switch off the power of your external audio device as well.