SRCD682BT Please read before using this unit Portable CD Player with PLL AM/FM Radio, Bluetooth and LCD Display 1
COMPLIANCE WITH FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Control Location (Front and Top Views) Control Location (Rear View) 5
Power Connection Connecting AC Power Connect the small end of AC cord to the socket at the back of the main unit and insert the plug of AC cord into standard AC wall outlet. Caution: The unit is designed to operate from mains supply of AC 120V~60Hz. If the plug of AC cord does not fit properly, try to turn it over and try again. Do not force it. When the unit is intended for being unused for a long period of the time.
Caution: There is a danger of explosion if batteries are replaced incorrectly. Replace batteries with the same type and same brand only. When the unit is intended for being unused for a long period of the time, press the button to turn OFF the unit and remove all batteries from the main unit. Main Operation Switching On for the first time Plug into AC power or install batteries by following instructions on the previous Power Connection section. Press the button to turn on the unit.
CD Operation The unit is designed to play normal music CD disc bearing the correct identification logo. If the disc does not confirm tothe standard, it may not be played back properly. Caution: • Playback of CD-R / CD-RW may depend on recording conditions. • Do not attach a seal or label to either side (the recordable side or the labeled side) of a CD-R/ RW disc. It may cause malfunction. • Do not load a blank CD-R/ RW disc. It will take over 1 minute to read the disc.
CD Operation-Continued Repeat playback modes (Repeat 1 / Repeat all) Repeat the Current Track During playback, press the REP/ PROG button until the icon is displayed to select the current track/file to be repeated. The selected track/file will be repeated continuously. Repeat All Tracks During playback, press the REP/ PROG button until on the disc will be repeated continuously. icon is displayed. All tracks/files Return to normal playback Press the REP/ PROG button until NO repeat indicator is displayed.
Bluetooth Operation 1. If the unit has never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link the SRCD682BT with your Bluetooth device. • Press the button to turn on the unit. • Press and toggle the FUNCTION button to select Bluetooth mode. The unit will search the paired device with the “ bt ” flashing slowly on the LCD display. • Press and hold the PLAY/PAUSE/PAIR Button for 4~5 seconds.
AUX IN Operation Setting up (AUX IN) connection AUX-IN jack will allow you to connect external music player or external sound source to the main unit. 1. Plug into a 3.5mm audio cable (not included) into your external music player and connect the other end (3.5mm jack) into the AUX IN jack on the top of the unit. 2. Make sure your external music player is turned on. 3. Press and toggle the FUNCTION button to switch to AUX mode on the unit. 4. Start music playback on your external music player. 5.
Specifications Power Output. . . . . . . . . . . . . . . . . . Speakers . . . . . . . . . . . . . . . . . . . . . . CD Disc- Disc Diameter . . . . . . . . USB Charging. . . . . . .. .. . . . . . . AC Power ............ Battery Size . . . . . . . . . . . . . . . . Radio Frequency. . . . . . . . . . . . . . . Dimensions (H x W x D) . . . . . . . . . 3 watt RMS x 2 channels 4 Ohms 5 W, 3 inch x2. 120mm / 80mm DC 5V , 1A AC120V~60Hz UM-1 or D-Size batteries x 8 PCS FM: 87.
