User's Manual

E-8
5. Adjust the Volume Control (#3) to obtain the desired sound level from the
Built-in Speakers.
6. To pause playback, press the Play/Pause Button (#17). The
Play/Pause Indicator (#19) will flash. To resume playing, press the
Play/Pause Button (#17) again.
7. You can choose to play your favorite track directly by pressing either the
Skip/Search Forward Button (#16) or Skip/Search Backward
Button (#12). The LED Display (#9) will indicate the correct track number
selected.
8. To locate a particular section within a track, press and hold the Skip/Search
Forward Button (#16) or Skip/Search Backward Button (#12)
until the section is found. Release the button to continue playing your
selection.
( The SEARCH function does not apply to Bluetooth operation. )
9. To stop playing, press the Stop ■ Button (#14).
10. When you wish to turn off the CD Player, set the Function Selector
(#2 0 ) to the "OFF" position.
REPEAT MODE
REPEAT 1
When the REPEAT button (#13) is pressed once, the Repeat Indicator (#18)
will light and flash . The current track will be played repeatedly.
REPEAT ALL
When the REPEAT button (#13) is pressed twice, the repeat indicator (#18) will
light steadily. The whole disc will be played repeatedly.
CD PROGRAM PLAY MODE
This function allows the CD tracks to be played in programmed sequence.
NOTE: Program can only be set in STOP mode.
1. Load the CD Disc you wish to program.
2. Make sure the unit is in STOP mode.
3. Press the Program Button (#15) once, location "01" will show on the LED Display (#9 )
and the "PROG" indicator (#11) will blink.
4. Press Skip/Search Forward Button (#16) or Skip/Search Backward
Button (#12) until the desired track number is reached.
5.
Press the Program Button (#15) to store the selection.
6. Repeat the (4) & (5) steps until you have entered all the tracks you want to program.
7. To play the stored sequence, press the Play/Pause Button (#17).
8. After all memory tracks have been played, the CD will stop automatically.