Bluetooth CD Radio Microsystem Model: SRCD1081BT Instruction Manual PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE.
CONTENT Important Safety Instructions ................................................................................. 1 Buttons and Controls ............................................................................................... 3 Remote Control ........................................................................................................ 4 Getting Started .........................................................................................................
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5.
19. The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. 20. The mains plug is used as disconnect device, the disconnect device shall remain readily operable. 21. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 22.
BUTTONS AND CONTROLS MAIN UNIT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10 11. IR STANDBY PHONES JACK AUX IN JACK SOURCE BUTTON BALANCE KNOB STOP BUTTON / TUN- BUTTON TREBLE KNOB / PAIR BUTTON / TUN+ BUTTON 12. 13. 14. 15. 16. 17. 18. 19. BASS KNOB CLK SET, MEM/PROG BUTTON REPEAT / M- BUTTON VOLUME KNOB M+ BUTTON LCD DISPLAY EJECT/ENTER BUTTON CD COMPARTMENT 20 & 21. VOLUME (VU) METER FM ANTENNA 22. 23. SPEAKER SOCKET 24.
REMOTE CONTROL 1. CLOCK SET, MEM/PROGRAM: Set clock timer, CD program playback and radio memory. 2. STANDBY BUTTON: Set the unit to ON / STANDBY. 3. SOURCE: Select BLUETOOTH, CD, FM or AUX function. 4 & 9. / TUN- , / TUN+: Skip tracks backward or forward in CD mode. Adjusts the frequency in FM mode. 5 & 10. MEM-/+: Choose the preset location for the corresponding station. 6. / PAIRING : Pause and resume playback or pairing Bluetooth device. 7. EJECT/ENTER: In CD mode, eject and close CD tray.
GETTING STARTED CONNECTING THE EXTERNAL SPEAKERS The speaker input sockets are located at the back of the main unit. 1. Unwrap the speaker wire from the left speaker and plug it into the left (L) speaker socket on the main unit. 2. Unwrap the speaker wire from the right speaker and plug it into the right (R) speaker socket on the main unit. 3. Make sure the speaker cables are not run in areas where they could cause danger. Connecting to a Power Source 1.
LISTENING TO THE RADIO 1. Press the SOURCE button to switch to the FM RADIO. The display will show a radio station: “87.5”. 2. Tune to a desired radio station. The frequency is indicated on the display. • MANUAL TUNING: Press the TUN+ or TUN- button briefly and the frequency will tune up or down. • AUTO SEARCHING: Press the TUN+ or TUN- button for more than 2 seconds, the radio frequency will start to change on the display.
LISTENING TO A CD 1. Press SOURCE button until the display reads “CD”. 2. Press the EJECT/ENTER button to open the CD door, put a CD onto the CD tray with the printed label facing up (towards you). To close the CD door, press EJECT/ENTER button again. Note: Remember to remove the CD when you are finished listening. To Play a CD When Stopped: Press the /PAIR button. The disc will play from track 1 and play indicator appears on the display. To Pause a CD While Playing: Press the /PAIR button.
DISC MAINTENANCE Depending on the quality of the disc, and the condition of the recording, some CD-R/CD-RW discs may not be playable. How to remove the disc How to hold the disc How to clean the disc 1. Always place the compact disc in the disc tray with the label facing upward. (Compact discs can be played only on one side). 2. To move a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. 3.
AUX-IN OPERATION External (auxiliary) audio sources such as tablets, smartphones or MP3 players, can connect to the Bluetooth CD Radio Microsystem via aux-in. 1. Press STANDBY button to turn the unit ON and then press SOURCE button to select “AUX”. 2. Set the volume to the minimum level with the VOLUME KNOB. 3. Plug in an AUX-IN cable (not included) into the AUX-IN jack on the front of the unit. 4. Plug the other end of the cable into the headphone or Line-Out jack of the external source. 5.
• If the remote control unit is operated near other appliances which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other appliances may operate incorrectly. TO ACTIVATE THE REMOTE CONRTOL The remote control comes with a cell battery already installed. To activate the battery, remove the transparent tab at the bottom of the remote control. The remote control is now ready to use.
TROUBLESHOOTING GUIDE In case of trouble with the unit, please look through the problems below and see if you can solve them yourself before calling your dealer. PROBLEM CD PLAYER RADIO UNIT WHOLE UNIT Unit does not turn ON when STANDBY is pressed. CAUSE • Unit is unplugged SOLUTION • Connect unit to AC power supply No sound comes out of the speakers. • The external speakers are disconnected. • The volume is turned down (to MIN). • The input selector does not match the playback source.
SPECIFICATIONS AMPLIFIER Section Output Power.................................................... 25W + 25W Frequency Response ........................................ 60 to 20,000 Hz TUNER Section FM Section Frequency Range .............................................. 87.5 to 108 MHz CD PLAYER Section Frequency Response ........................................ 60 to 20,000 Hz Signal-to-Noise Ratio ........................................ 55 dB (IEC-A) SPEAKER SYSTEM Section Impedance.....................
FCC STATEMENT Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
5000130700E