Portable Bluetooth Wireless Speaker USER MANUAL SMPS-621 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
Dear JENSEN Customer Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
PROTECT YOUR FURNITURE!! This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture.
CHARGING INSTRUCTIONS The SMPS-621operates on a built-in Li-ion battery that can be recharged using either the USB port on your computer or from a USB power adaptor (not included) with a rated output of DC 5V/500mA and up. Note: The micro USB CHARGING JACK located on this unit is only designed for charging the built-in Li-ion battery. CHARGING THE BATTERY FOR FIRST TIME 1.) Charge the built-in Li-ion battery a minimum of 2 hours prior to first use.
PAIRING WITH YOUR BLUETOOTH DEVICE ABOUT PAIRING Pairing is the term used when two Bluetooth devices are connected wirelessly for the first time. This allows the devices to see each other and sets up a one to one communication channel between both devices. To begin pairing with a Bluetooth device 1. Slide the POWER ON/OFF SWITCH (#9) to ON to turn on the unit. The (#6) will light blue and flash and the BLUETOOTH STATUS INDICATOR melody “TRI-TONE” is heard.
PLAYING FROM A BLUETOOTH DEVICE You can play music from your Bluetooth device wirelessly to SMPS-621 after successfully pairing. 1. Selecting your favorite song, press the PLAY button on your Bluetooth device or the / /PAIRING button (#3) on SMPS-621 to play or pause the Bluetooth device playback. 2. Slowly adjust both the VOLUME +/- buttons (#2/#5) of your SMPS-621 and your Bluetooth device until you reach a comfortable listening level. Notes: 1.
CONNECTING WITH A SMARTPHONE BY ONE TOUCH (NFC) ABOUT NFC NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices. 1. Make sure your Smartphone and the NFC function is turned on. 2.
CARE AND MAINTENANCE 1. 2. Avoid operating your unit under direct sunlight or in hot, humid or dusty places. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. CLEANING THE UNIT • To prevent fire or shock hazard, disconnect your unit from the USB port of power source when cleaning. • The finish on the unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts.
SPECIFICATION Power requirement: DC input: Battery Bluetooth Audio power output DC 5V 500mA (micro USB) built-in rechargeable Lithium-ion battery Bluetooth Specification version 3.0 Support profile A2DP / HFP 2.5W (rms). Dimensions Weight 83mm (H) x 82.5cm(W) x 82.5cm(D) 292g SPECTRA GREEN NOTICE At Spectra, environmental and social responsibility is a core value of our business.
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of FCC Rules.
