User's Manual

ALARM SETTING
1. Tap the Alarm 1 or Alarm 2 Button once to check the alarm time and
wake up option (Radio , Beeping Alarm, Bluetooth ).
2. In standby mode, press and hold the or button for 3 seconds when the
alarm time is sh owing. The hour digits will blink.
3. Tap the
or button to adjust the hour. Press and hold the button for fast
advance / reverse setting.
4. Press the or button to confirm the hour s etting, the minute
digits will flash
to prompt f or input.
5. Tap the or button to adjust the minute. Press and hold the button for fast
advance / reverse setting.
6. Press th e or button to confirm the minute setting, the alarm sound icons
will flash.
7. Tap the or button to sel ect th e wake up option (Radio , Beeping Alarm,
Bluetooth ).
8. Press the or button again to complete the alarm setting. The alarm
indicator or will appear to indicate it is enabled.
9. To disable the alarm, in Standby mode, tap the or button twic e f or the
alarm you want to disable, relative alarm indicator will disappear from display. Tap
the or button twice again will enable the alarm.
Note:
The alarm will automatically switch to the beeping alarm if you selected wake to
Bluetooth but do not have a Bluetooth-enabled device connected.
If you select wake to Radio, make sure your rad
io station is set to the one y ou want
to be wok en up t o. The unit will play the last radio station you were listeni ng to
when the wake time is reached.
The unit features a cresce ndo wake up for the beeping alarm, radio or Bluetooth.
When the alarm time is reached, the sound will increas e gradually from a very low
level to a louder l evel. When waking to r adio and Bluetooth, the preset volume
level will be the loudest level and it will be reached after about 30 seconds.
Wake to Radio
1. The Radio will aut omatic ally turn on when the alarm time is reached. The
respective or indicator will blink.
2. The sound starts s oftly and gradually becomes louder until pr eset v olume level is
E-6
reached.
3. The radio alarm will sound for 60 minutes and then turn off automatically if the
snooze button is not pressed.
4. To stop the radio sound immediately, tap the or respective alarm button.