User's Manual

2. Turn on the unit and tap the Source Button to select Bluetooth m ode, Bl uetooth
icon will be flashing slowly on display. The unit is searching the last paired
device. Once it is found, the icon will light steadily.
3. After successfully pairing (linking ), you can begin playing music from your
Bluetooth enabled device wirelessly to the speaker.
4. Press th e Volume +/ Volume - Button on the speaker to adjust to the desired
volume level.
5. After selecting your favorite song, press Play / Pause Button on the unit to
play or pause the playback song.
6. Press or button to sk ip to the previous or next song.
7. If the unit need to pair with another Bluetooth device. Press an
dholdthePair
Button for 4~5 seconds. The icon will be flashing rapidly on the LCD display
and 2 short beep will heard, the unit will goes into Pairing/Discoverable mode
again. Repeat last 2 steps on point 1 abov e.
Notes:
1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth
enabled devices for Bluetooth operation since it may vary from model to model.
2. If your Bluetooth enable
d device d oes not support A2DP profile, it will not pl ay
the music through the speaker, ev en if paired (linked).
3. If you are pairing (linking) your computer to the unit using Bluetooth, y ou may
need to set the speaker as your computer’s default sound device.
Using the unit as a Hands-free Bluetooth Speakerphone
1. Link your cell phone to the unit via Bluet ooth as described above.
2. When receiving an incoming call on your cell phone, tap th e Phone Button on
the unit to switch the incoming call from cell phone to the unit. A short beep tone will
be heard c onfirming the call is being answered. Complete your call using the built-in
microphone and speaker on the unit.
3. Press the Volume +/ Volume - Button on the unit to obtain the desired sound level.
4. To end the call, just t ap the Phone Button on the unit again. A sh ort beep
E-9
sound will be heard and the call will end. If you are playing music from your cell
phone to the unit before answering the call, the music will automatically resume
playing when you h ang up.
5. To ignore an incoming call, simply press and hold the Phone Button on the
speaker for about 3 seconds, a short beep tone will be heard and the call will be
rejected.
Hang up with the JBD-100A
AquickpressonthePhone Button will end the call in progress. A short beep tone
will be heard from th e speak er confirming the c all has ended.
Redialing the last number with the speaker
The speaker will automatically redial the last number you have dialed by pressing &
holding the Phone Button on the speaker for about 3 seconds a long beep will
heard.
Note: This feature is phone dependent.